PUMP INTIATION & FLOW METERS



     
SPECIFICATION

0 -16 Bar 100mm Glycerin filled bourdon tube pressure gauge for sprinkler alarm valve and pump house equipment. Complete with 1/4” to 1/2” BSP no loss connector. Complies with BS EN 837-1.

Features: Stainless steel case and direct mounting bottom entry.


SPECIFICATION

Pump initiation boards are ready for wall mounting in the pump house. Each initiation has a separate test arrangement and connection with a common drain. All units are pressure tested to 16 Bar prior to dispatch.


SPECIFICATION

The model 86A (S201B) single clapper Rapidrop two way fire department inlet, has a maximum capicity of 1892 litres per minute. The standard unit incorporates two 2.1/2" NST swivel inlets, and one 4" BSP outlet.
DOWNLOAD CATALOGUES

Pressure Gauge 16 bar Glycerin Filled (6.1).pdf

DOWNLOAD CATALOGUES

Pump Initiation Board (6.2).pdf
DOWNLOAD CATALOGUES

Fire Department Inlet (6.3).pdf
 



 



 



SPECIFICATION

LPCB approved sprinkler system flow meter that can be installed between flanges (Fireflange) or with grooved couplings (Firegroove). Unit includes integral restrictor and bleed assembly, filter and drain assembly plus spare metering glass. The preferred installation pipe layout would include the optional full bore isolating valve upstream of the meter and a control valve down stream of the meter.

LPCB Certificate No. 464a/01-10 inclusive.
Maximum Working Pressure 12 bar.


SPECIFICATION

LPCB approved sprinkler systems flow meter that can be installed in automated systems, between flanges or with grooved couplings. Unit includes full bore isolating valves for meter isolation, filter cleaning or flow tube replacement (spare supplied). The in-line filter avoids clogging of the bypass line or the flow restrictor with pipe debris. The bleed valves allow drainage of the metering section and/ or venting of trapped air. Suitable for horizontal or vertical pipes.

LPCB Certificate No. 088a/05-14 inclusive.
Maximum Working Pressure 12 bar.


SPECIFICATION

The Fire Pump Test Meters are available in Butt Weld, Grooved, 150 # Flanged and 300 # Flanged.

FM Approved.


DOWNLOAD CATALOGUES

Flow Meter (6.4).pdf
DOWNLOAD CATALOGUES

Flow Meter (6.5).pdf
DOWNLOAD CATALOGUES

Fire Pump Test Meter (6.8).pdf
 








   
SPECIFICATION

FM approved sprinkler system flow meter that can be installed between flanges or with grooved couplings.
   
DOWNLOAD CATALOGUES

Flow Meter (6.9).pdf
   


TRỤ SỞ TP.HCM:
Địa chỉ   :  189 Nguyễn Văn Thủ, P.Đakao, Q.1, TP.HCM
Tel   :   (08) 3910 7080 / 81/ 82
Email  :  info@toangiaphat.com

VĂN PHÒNG ĐÀ NẲNG:
Địa chỉ   : 150 Bế Văn Đàn, Thanh Khê, Đà Nẳng
Tel        : 0909 606 568
Email   :   info@toangiaphat.com

VĂN PHÒNG HÀ NỘI :
Địa chỉ   : số 4 ngõ 44/1 Đỗ Quang,  Trung Hòa, Cầu Giấy, Hà Nội
Tel         :   
0976 421 216
Email   :   info@toangiaphat.com

Lượt truy cập:  7131940
Online:  38